JOREDABE Industrial Corporation

  • Address: Unit 2A, B 180, L 9D Phase 2, Mabuhay City Main Avenue Brgy., Mamatid Cabuyao 4025, Laguna Philippines
  • Email: info@joredabe.com | sales@joredabe.com

BALTECH VP-3470

Category:

BALTECH VP-3470 allows to perform a dynamic balancing of rotors in their own bearings at the operating speed. The main reason of the elevated vibration is an unbalance, which leads to bearing heat and destruction. BALTECH has developed BALTECH VP-3470 for the dynamic balancing of fans, exhausters and electric motors.

The dynamic balancing is performed based on 3 planes and 8 control points. The balancing procedure includes three stages: measurement of an initial vibration and phase, test run, calculation and installation of balancing masses, check run. A built-in vector calculator allows to carry out addition or subtraction of vectors if the calculated mass can’t be mounted on the calculated location. BALTECH VP-3470 makes it possible to perform a harmonic vibration analysis to detect a reason of the elevated vibration. Balancing protocols are stored in the device memory and can be transferred to the BALTECH Expertsoftware

Features of BALTECH VP-3470:

  • Vibration meter mode: measurement of the overall vibration (vibration velocity, vibration acceleration, vibration displacement, RMS, Peak, excess)
  • Phase meter mode
  • Tachometer mode
  • Multiple plane balancing with BALTECH Balance the balancing software (test run, mode- dynamic influence coefficient)
  • Test mass calculation
  • Calculation of a test mass and angle of the balancing mass location
  • Stroboscope connection
  • Waveform measurement (oscillograph mode)
  • Spectral analysis (vibration velocity, vibration acceleration, vibration displacement)
  • Time domain and spectral analysis of high- frequency envelope
  • Temperature measurement (contact sensor)
  • BALTECH VP-3470 allows to transfer the measurement data to the software BALTECH Expert for database management, data analysis, prediction, diagnostics and report creation.

 

TECHNICAL CHARACTERISTICS
Input
Number of channels 2 analog channels 1 synchronizing channel
Inputs ICP accelerometer (two channels), speed sensor (one channel)
Transducer type Accelerometer, speed sensor, stroboscope
Integration Digital
Frequency range, Hz 0.5 – 10000
Maximum bandpass flatness% ± 5
Vibration parameters
Measured parameters Vibration acceleration , vibration velocity, vibration displacement
Detector RMS, Peak, Peak-Peak, Peak- factor, excess
Number of averages 1-100
Vibration measurement bands, Hz
Standard 2…200, 2…1000, 10…1000, 10…2000
Additional: 10…10000
Measurement ranges
Vibration acceleration, m/s2 0.05…300
Vibration velocity, mm/s 0.05…1000
Vibration displacement, um 0.05…10000
Spectral analysis
Boundary frequencies, Hz 200, 500, 1000, 2000, 5000, 10000
Number of lines 400, 800, 1600
Windows Rectangular, Hanning, Blackman-Hamming
Dynamic range, dB Not worse than 75
Envelope detector with band-pass filters
2/3 octave, Hz 4000, 5000, 6300, 8000
1/3 octave, Hz 4000, 5000, 6300, 8000
1/1 octave, Hz 4000, 5000, 6300, 8000
Vibration and phase measurement
Rotation frequency range, Hz 0.5…2000
Frequency error, % +/- 1
Phase error, angle +/- 5
Amplitude error, dB +/- 1
Automatic control Sensor connection control
Amplitude measurement unit dB, g, m/s2, mm/s, um
General characteristics
Display LCD
Display size 3.5″
Resolution, pixels 320×240
Memory, MB 8
Keyboard Film
Interface USB
Battery charge indicator
Red/Green
Discharged/ Charged
Safety class IP 65
Weight of the display unit, kg 1.00 ±0.01
Dimensions (length x width x height), mm 190x140x35
Weight in the carrying case, kg 7.00±0.5
Dimensions in the carrying case, mm 470x140x380
AC supply voltage, V / Hz 220±22 / 50
Power supply, V / mAh 3.3 / 2000
Battery charging time, hour ˜ 4
Battery working time, hour ≥8

Reviews

There are no reviews yet.

Be the first to review “BALTECH VP-3470”

Your email address will not be published. Required fields are marked *